Sodium silicate equipment operation, during this period will accumulate some dust, the dust Sodium silicate equipment operation to bring adverse factors, so we will regularly on the dust cleaning, Sodium silicate equipment can safe and stable operation. So we should be for those aspects to clean? In general Sodium silicate device is mainly divided into external cleaning and internal Sodium silicate equipment cleaning. Jinan jiuzhou longyuan environmental protection and energy saving equipment below is simple for you to introduce clear steps and need to pay attention to.

Internal clean up, that means the bubble inside of spent alkali equipment, because Sodium silicate will have a certain coagulability, because it is a sticky liquid, if we are not ready for a production for a long period of time, or at off-duty time on paohuajian equipment internal clean up, clean up note is in order to prevent the device will make a long time without use of internal residual solidification Sodium silicate, blocking internal pipeline Sodium silicate equipment failure. So our work is more simple, is after a Sodium silicate in production. Immediately in a lots of mild warm water, and start running equipment. Let the equipment internal residual paohuajian fully wash, finally all dissolved into the warm water.

External cleaning, clean up the two aspects are the main external cleaning. The first aspect is to clean up the dust, because coal will produce a lot of dust, will cause the equipment covered in a thick layer of dust, if the dust is not clear for a long time will affect equipment cooling, as well as the equipment operation fluency, and there will be further may cause equipment scrap. So we will timely clean up the dust, to ensure the smooth running of motor and speed reducer. And cylinder surface, because of the operation often make some Sodium silicate residues in the above. Time there will be heavy dirt, so will have to be cleaned up on a regular basis. Is another aspect of the cleaning some safe hidden trouble, for example, we often use the lubricating oil, but the extra oil would remain on the ground, the high temperature can cause burning, so we should also to regularly clean operating area of the ground.